Menu
close
Visit our InstagramVisit our LinkedInVisit our YouTube channel

TINTO COLOR PRIMTEC STEEL AND 2K

PRIMTEC steel and 2K series primers provide effective anti-corrosion protection of metals and are the basis for intumescent FIRESTOP coatings. They are applied to metal surfaces from which corrosion, grease and impurities have been removed, according to the recommendations from the Technical Documentation. Our Technical Service will provide you with advice on the application and selection of the best coating system according to the requirements of your project.

PRIMTEC steel B100

Type
One-component quick-drying primer based on short-oil alkyd resins, organic solvents, pigments and liquid anti-corrosion additives
Usage
Protection of steel structures and other metal surfaces in the interior and exterior
Colour
Oxide red, grey, *other shades on request
Application
Airless pump, air compressor gun, brush, roller
Consumption

5,5-6,5 m2/kg for za 40-50 µm DFT

Dilution
PRIMTEC thinner as needed 5-10%
Drying time
to the touch 30-60 min, completely dry in 24 h (23°C)

PRIMTEC steel 1 Step Coat

Type
One-component quick-drying primer based on short-oil alkyd resins, organic solvents, pigments and liquid anti-corrosion additives
Usage
Protection of steel structures and other metal surfaces in the interior and exterior. It allows the application of 80-100 µm DFT in one layer.
Colour
Oxide red, grey
Application
Airless pump, air compressor gun, brush, roller
Consumption

2,5-3,5 m2/kg za for 80-100 µm DFT

Dilution
PRIMTEC thinner as needed 5-10%
Drying time
to the touch 45-60 min, completely dry in 24 h (23°C)

PRIMTEC steel S200

Type
One-component quick-drying primer based on short-oil alkyd resins, organic solvents, pigments and liquid anti-corrosion additives
Usage
Protection of steel structures and other metal surfaces in the interior and exterior
Colour
Oxide red, grey
Application
Airless pump, air compressor gun, brush, roller
Consumption

5,5-6,5 m2/kg for 40-50 µm DFT

Dilution
PRIMTEC thinner as needed 5-10%
Drying time
to the touch 2 h, completely dry in 24 h (23°C)

PRIMTEC steel Zn

Type
One-component quick-drying primer based on short-oil alkyd resins, organic solvents, pigments and zinc phosphate
Usage
Protection of steel structures and other metal surfaces in the interior and exterior
Colour
Oxide red, grey
Application
Airless pump, air compressor gun, brush, roller
Consumption

5-6 m2/kg for 40-50 µm DFT

Dilution
PRIMTEC thinner as needed 5-10%
Drying time
to the touch 1 h, completely dry in 24 h (23°C)

PRIMTEC 2K EPOX S200

Type
Two-component quick-drying primer based on epoxy resins, organic solvents, pigments and liquid anti-corrosion additives
Usage
Protection of steel structures, galvanized surfaces, aluminium and other metal surfaces exposed to mechanical and chemical influences in the interior and exterior
Colour
Oxide red, grey
Application
Airless pump, air compressor gun, brush, roller
Consumption

5-6 m2/kg for 60 µm DFT

Mixing ratio A:B
6,5:1
Dilution
PRIMTEC thinner as needed 5-10%
Drying time
to the touch 3-4 h, for manipulation 24 h, complete hardening 5-7 days (23°C)

PRIMTEC 2K EPOX Zn

Type
Two-component primer based on short-oil epoxy resins, organic solvents, pigments and zinc phosphate
Usage
Protection of steel structures, galvanized surfaces, aluminium and other metal surfaces exposed to mechanical and chemical influences in the interior and exterior
Colour
Oxide red, grey
Application
Airless pump, air compressor gun, brush, roller
Consumption

5-6 m2/kg for 60 µm DFT

Mixing ratio A:B
6,5:1
Dilution
PRIMTEC EP thinner as needed 5-10%
Drying time
to the touch 3-4 h, for manipulation 24 h, complete hardening 5-7 days (23°C)

2K EPOX MIOX

Type
Two-component interlayer coating based on epoxy resins, organic solvents, pigments and MIOX. It is applied as an intermediate layer over the existing base colour, and can also serve as a base colour.
Usage
Enhanced anti-corrosion protection of steel, galvanized and other metal surfaces, exposed to mechanical and chemical influences in the interior and exterior.
Colour
Oxide red, grey
Application
Airless pump, air compressor gun, brush, roller
Consumption

2,5-3,5 m2/kg for 100-150 µm DFT

Mixing ratio A:B
6,5:1
Dilution
PRIMTEC EP thinner as needed 5-10%
Drying time
to the touch 3-4 h, for manipulation 24 h, complete hardening 5-7 days (23°C)

PRIMTEC 2K EPOX MASTIC

Type
Two-component coating based on epoxy resins, organic solvents, pigments and MIOX. It is applied as an intermediate layer over the existing base colour, and can also serve as a base colour.
Usage
Enhanced anti-corrosion protection of steel, galvanized and other metal surfaces, exposed to mechanical and chemical influences in the interior and exterior.
Colour
Oxide red, grey
Application
Airless pump, air compressor gun, brush, roller
Consumption

1,5-2 m2/kg for 200-300 µm DFT

Mixing ratio A:B
6,5:1
Dilution
PRIMTEC EP thinner as needed 5-10%
Drying time
to the touch 3-4 h, for manipulation 24 h, complete hardening 5-7 days (23°C)

PRIMTEC 2K shop primer

Type
Two-component workshop primer based on epoxy resins, organic solvents, pigments and zinc phosphate
Usage
Fast temporary anti-corrosion protection of steel and other metal surfaces in the construction phase - during transport, before installation and top coating.
Colour
Oxide red
Application
Airless pump, air compressor gun, brush, roller
Consumption

12-15 m2/kg for 25 µm DFT

Mixing ratio A:B
5:1
Dilution
PRIMTEC EP thinner as needed 5-10%
Drying time
to the touch 15-20 min, completely dry in 24 h

PRIMTEC 2K Epox Pro Tank

Type
Two-component anticorrosive coating based on epoxy resins, organic solvents, pigments and anticorrosive additives. It is applied as only coating in the system.
Usage
Protection of metal tanks for oil and oil derivatives. It provides effective anticorrosive protection and forms solid film mechanically and chemically resistant to diesel, gasoline, kerosene, synthetic motor oil, etc.
Colour
Oxide red, grey
Application
Airless pump, air compressor gun, brush, roller
Consumption

5-6 m2/kg for 60 µm DFT; 1,5-2 m2/kg for 180-200 µm DFT

Mixing ratio A:B
8:1
Dilution
PRIMTEC EP thinner as needed 5-10%
Drying time
to the touch 3-4 h, for manipulation 24 h, complete hardening 5-7 days (23°C)

Characteristics

Effective anti-corrosion protection

Excellent adhesion to metal surfaces and resistance to external atmospheric influences

Easy to use

Spray or brush application with fast interlayer drying for more dynamic work

Ideal base for expanding coating

Do you want to know more about our products and services?
Contact us!
Copyrights © 2023 All rights reserved to Firestop Internacional
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram