The top coatings of the CENTURION series provide effective protection of metal surfaces and previous coatings from atmospheric, mechanical and chemical influences. They are applied over primers and intumescent coatings, providing protection and colour, i.e. decorativeness at the same time. Our Technical Service will provide you with advice on the application and selection of the best coating system according to the requirements of your project.
CENTURION B100
Type
One-component quick-drying top coating based on short-oil alkyd resins, organic solvents and pigments
Usage
Protection and decoration of steel structures and other metal and wooden surfaces in interior and exterior
One-component quick-drying top coating based on short-oil alkyd resins, organic solvents and pigments. It is applied over suitable primer or as a single coat in the system.
Usage
Protection and decoration of metal surfaces for special purposes like agricultural and industrial machines, vehicles etc. in interior and exterior
Two-component top coatings based on acrylic-polyurethane resins, organic solvents and pigments
Usage
Long-term protection and decoration of steel building and industrial structures and machines exposed to atmospheric, mechanical and chemical influences in the exterior
Colour
According to RAL tone maps
Application
Airless pump, air compressor gun, brush, roller
Consumption
7-8 m2/kg for 70 µm DFT
Mixing ratio A:B
8:1
Dilution
PU thinner as needed max 10%
Drying time
to the touch 3-4 h, for manipulation 24 h, complete hardening 7 days (23°C)
Two-component quick-drying top coating based on acrylic-polyurethane resins, organic solvents and pigments
Usage
Long-term protection and decoration of steel building and industrial structures and machines exposed to atmospheric, mechanical and chemical influences in the exterior
Colour
According to RAL tone maps
Application
Airless pump, air compressor gun, brush, roller
Consumption
7-8 m2/kg for 70 µm DFT
Mixing ratio A:B
8:1
Dilution
PU thinner as needed max 10%
Drying time
to the touch 2 h, for manipulation 24 h, complete hardening 7 days (23°C)
Two-component coating based on acrylic-polyurethane resins, organic solvents and pigments that is applied directly to the metal and serves as the only coating of the system
Usage
Long-term protection and decoration of steel building and industrial structures and machines exposed to atmospheric, mechanical and chemical influences in the exterior
Colour
According to RAL tone maps
Application
Airless pump, air compressor gun, brush, roller
Consumption
7-8 m2/kg for 70 µm DFT
Mixing ratio A:B
12,5:1
Dilution
PU thinner as needed max 10%
Drying time
to the touch 3-4 h, for manipulation 24 h, complete hardening 7 days (23°C)
